Help support WeTheArmed.com by visiting our sponsors.

Author Topic: Traditional "Air Cushion" Felt Shotshell Wad  (Read 1787 times)

RMc

  • Senior Contributor
  • *****
  • Posts: 2234

  • Offline
Traditional "Air Cushion" Felt Shotshell Wad
« on: October 16, 2014, 11:24:26 pm »
For those who like to assemble traditional smokeless or black powder shotshells here is a component not seen in recent years.  The use of a hollowed out cushion wad to be used with a thin card separating it from the shot charge harkens back to the interwar years of shotshell deveopment.  The use of this type of felt "doughnut" wad to form an "air-cushion" intended to reduce pellet setback deformation, was discussed by Major Sir Gerald Burrard in his 1931 two volume work The Modern Shotgun.  

Lest you think this was back in the dark ages, it was in the 1930's that fold crimp factory loaded shotshells began to appear on the shelves of shooting sports emporiums.   :coffee

Of course if you are drawn to assemble such arcane cartridges, you will be forgiven if wearing tweed seems to be the most fashionable of hunting attire when afield.   :hmm

Oh yes, the felt wad noted in this discussion can be seen at link below:

http://www.ballisticproducts.com/12ga-CT2-1_4-Felt-Wad-per-500/productinfo/122CT2/
« Last Edit: October 17, 2014, 12:10:48 am by RMc »
Alabama

WeTheArmed.com

  • Advertisement
  • ***

    alone

    • Contributor
    • ****
    • Posts: 1388

    • Offline
    Re: Traditional "Air Cushion" Felt Shotshell Wad
    « Reply #1 on: October 17, 2014, 10:40:39 am »
    Thank you for posting yet another fascinating, historical piece on the shot-shell.

    None of us will ever accomplish anything excellent or commanding except when he listens to this whisper which is heard by him alone.

    - Ralph Waldo Emerson

    RMc

    • Senior Contributor
    • *****
    • Posts: 2234

    • Offline
    Re: Traditional "Air Cushion" Felt Shotshell Wad
    « Reply #2 on: October 17, 2014, 06:33:04 pm »
    There yet remains a most interesting mystery in Ballistic Products' detailed description:

    "SPECIAL PURPOSE FOR LAW ENFORCEMENT AND MILITARY: 12ga 1/4" Felt Wad with a "donut" cut in the middle for highly specialized loads. .760" outside diameter x .375" internal diameter."

    http://www.ballisticproducts.com/12ga-CT2-1_4-Felt-Wad-per-500/productinfo/122CT2/

                                                               :hmm
    Alabama

    Help support WeTheArmed.com by visiting our sponsors.